top of page
ajbrace logo.jpg

- Welded steel lateral bracing frames

- Available on the shelf to suit standard-size ceiling heights

- For use in timber and steel frame construction

- No leadtimes

- Allows for maximum open-plan living with minimum walls

- Custom sizes available upon request

ENGINEERED LATERAL WALL BRACING SYSTEM 

table.jpg

Installation Instructions

•    Mark hole positions – Minimum 60 or 75mm from edge and 100mm from the returning edge as per the Diagram.  

•    Drill 2x Ø22mm hole to 240mm minimum depth.

•    Remove dust - Chemset M20 Grade 8.8 threaded rod and allow to set before tightening. (Refer Ramset Reo502 PLUS installation guide).

•    In order to Achieve Compliance, the Installer shall refer to the AJ Brace capacity table to determine the edge clearance required.

•    Fix the top of the AJ Brace to the top plate in accordance with good building Practices unless specified otherwise in the site-specific Engineering.

Click the download button below to download installation instructions

tablechart.jpg
bottom of page